Oil Change In West Chester, OH

Preserving your automobile’s engine is very important should you wish to maintain its life and should you ever intend on reselling it to a private-party or car dealership down the road. Maintaining the right motor oil levels is the easiest method by which you can protect your car’s destiny. Motor oil safeguards the engine by lubricating its alloy components, cleaning engine debris, cooling, restoring and securing the engine, overall.

Replace Oil Every 3 Months?

You’ve probably overheard that you need to replace your automobile’s oil at the 3,000-mile mark. However, most new cars can get by on 4,000 or even more. Keep in mind, though, that driving a motor vehicle in a very hot climate, driving frequently, or doing consistent, heavy towing will demand that you have your car serviced more frequently. As a reminder, you may put down your mileage at the last oil change on a blank Avery sticker. After approximately three-thousand miles you’re up for an oil change. At Impact Fleet, we’ll provide a top notch oil change in minutes. Doing it is essentially the most affordable and easiest way to defend the reliability of your engine.

Learn How To Change Your Oil In West Chester, OH

Begin by selecting the right oil and filter for your personal vehicle using one of the oil filter guidebooks obtained at your local auto part merchant or truck part dealer. Park at a flat work surface; start up the vehicle before you begin the procedure to guarantee that the oil is warm and moves more readily; activate the emergency brake; locate the oil drain plug beneath the engine block outside the front of the motor vehicle or as depicted as part of your vehicle user guidebook; now that you’ve found the plug put a small oil pan directly below; loosen up the plug by way of a wrench, turning counter-clockwise; have the plug drop in the tray to avoid coming in contact with lots of warm oil; let the oil empty into the tray (this will take around 5-10 minutes).

Take off the filer and identify the plug in your oil pan; take away the bolt skillfully by hand initially, and then transfer to the socket wrench; find the oil filter on the side of the engine; reposition the oil container to catch oil from the filter; remove the filter by hand or by utilizing a wrench; allow the filter to drop in the oil pan.

Replace the old filter; rub a layer of brand new oil up against the seal of the new filter with a rag; screw on the new filter in place of your existing one, again by using either an oil wrench or your fingers.

Finally, replace the oil. Locate the oil filler cap inside the hood and lay it aside; place a funnel inside the mouth of the filler; add in 4-5 quarts of brand new oil in accordance with your car’s manual; take out the funnel and replace the cap; start the truck and allow it to run for a few minutes; turn off the engine and check out the dipstick; add additional oil if necessary.

At Impact Fleet, we invite you to bring in any used oil in an effort to promote proper recycling.

  • Jasper Pref
  • Acdelco
  • ASE
  • Bosch
  • BF Goodrich
  • Bridgestone Firestone
  • Cooper Tires
  • Cummins Diesel
  • Duramax Diesel
  • FASS
  • Federated
  • Fleet Services
  • Goodyear
  • Hunter
  • Michelin
  • Motorcraft Parts
  • Ford Power Stroke Diesel
  • RV Repair
  • Tires

Impact Fleet Service

9980 Windisch Rd
West Chester, OH 45069

location small (513) 769-9333
Email the Shop


Weekdays:   7:00 AM - 5:00 PM

Make An Appointment

CMR Easy News Program  |   LIS


JASPER Program, Content, Page Layout, and CMR EasyNews Programming © by JASPERWebsites.com, a CMR, Inc program